Fixing Ball Shower Faucet

Screw on the cam and cap and reinstall the handle.

Fixing ball shower faucet. If the leaks persist or you don t have time to learn how to fix a leaky shower faucet you may want to replace the shower faucet with a new or updated model. Get access to the full video library at. You will be able to. Remove any debris or towels from the sink.

Then put those parts in a plastic bag and take them to the store with you when shopping. Remove seats and springs. Use an allen wrench to loosen the set screw enough to lift off the handle image 1. Go to the basement and turn off the dedicated shutoff valve for the bathroom.

Turn off the water to the shower. Attach the handle and tighten the set screw. Lift out the ball. Make sure to line up the tab on the cam seal with the slot on the faucet body when reassembling.

Replace the screw cover. You ll still have to buy a new handle and a repair kit that includes a new ball. Try grabbing it with the pliers and twisting. As you disassemble the old faucet lay the parts in order on a flat surface and snap a picture for reference.

Use needle nose pliers to screw on the adjusting ring until the ball feels snug in the faucet when the rod is moved back. Turn the water supply lines back on and check for leaks. Cover the shower. If its round or octagonal pry off the cap using a flathead screwdriver.

This is a tough fix. Repairing ball type faucets if the faucet leaks from the base around the bottom of the spout this is usually caused by a worn o ring at the bottom. If this kitchen faucet repair doesn t work the only solution is to replace the entire faucet. Lift out the ball.

How to repair a shower faucet ball valve 1. Close the drain and place a towel in the sink to protect the surface and catch any dropped parts. Tighten the setscrew in the handle with a hex wrench. Remove the faucet handle.

The goal is to separate the parts so that you can salvage and reuse the cap. Plastic types can wear out in less than a year which means that you ll be doing this repair again before you know it. If your faucet has a plastic ball replace it with a metal one. Most leaky shower faucets are easy to fix but if problems persists ask your local home depot plumbing associate for help or call a professional plumber.

The handle of the ball type faucet rests on a dome shaped body and is attached by a set screw.